Project Description

window sticker, logo, cut-to-shape, with, transfer tape

Window sticker, logo, cut-to-shape, with, transfer tape

Custom window stickers with your own unique design. You design it yourself, quick and easy with our online designer. If you are looking for cut-to-shape window stickers (i.e., non-rectangular window stickers), contact us directly by email. We can supply you with both rectangular and cut-to-shape reverse window stickers.

Our made to measure window sticker solutions are made of high quality vinyl and will arrive pre-assembled in a sturdy box. Ready for application, no additional work is required.

The window stickers are weather and water resistant. The material itself blocks light (the material itself is largely opaque). This material blocks about 90% of incoming light. Thus this window film can be used to reduce heat and glare from the sun inside buildings and vehicles. In addition, it provides privacy.

You can pay for your order by bank transfer, credit/debit card or PayPal. We will not charge an additional fee. Shipping costs are displayed during checkout in pounds excl. VAT. For example, NL £ 3.49, UK £ 6.99, BE/DE £ 4.99.

We ship worldwide. Shipment will occur within 2 to 5 workdays after we receive your payment. You will receive an automated email with a track and trace code to follow your order. Do NOT accept severely damaged packages. Estimated shipping time to London is 3 working days (door-to-door), greater London area, generally 3 to 4 working days. Wales 4 working days. Scotland and Isle of man, around 4 to 5 working days, door-to-door. The northern islands generally 5 to 7 working days.

Designing window stickers

Make your window sticker design 1:1. Use millimeters as the measurement unit. For cut-to-shape. Everything, that needs to be cut, need to consist of vectors (ideally). Nothing smaller than 3mm. Lines need at least a width of 3mm. A dot (the smallest possible object) need to be at least 3×3 mm. Minimum height of fonts need to be at least 20mm. Script fonts at least 30mm. More design information you will find here.

For images/photos we advise a minimum resolution of 3×3 pixels per square millimeter (75 dpi). Or 3000×3000 pixels per square meter (1000×1000 mm). JPG/PNG files with high resolution, low compression.

Measure the size of the window glass. We advise you to subtract both 10 mm from the length and 10 mm from the height of this measurement (if you intend to cover the entire window). For a good and easy fit of your own unique window sticker.

Applying window stickers

Your window sticker will arrive in a sturdy box (pre-assembled) with a squeegee (free of charge). After you have received your window stickers, unroll the material as soon as possible. Do NOT store the material in the box until use.

For instructions and videos see our installation webpage. Please read the general instructions first. Subsequently the product specific instructions and after these watch the instruction videos. Make sure to not apply window stickers in direct sunlight, make sure the temperature of the window sticker, the window itself and the surrounding air, is -ideally- around 15 to 18 degrees Celsius.

First, clean the window thoroughly. Remove paint, grease and other dirt (with a glass scraper). If any is left behind, it will always be visible! Also clean the surrounding area, like the window frame itself. If you are applying near the ceiling and/or the ground make sure they are also clean. Also be wear of flying insects. Use the free supplied squeegee and card over the application-tape/transfer-tape on the front of the window sticker to further increase the binding between the two. Use a flat surface, like a sturdy table.

Remove the backing paper. Carefully. When the window sticker contains cut-outs/letters/elements, be very careful when removing the backing paper, as to not tear the window sticker itself, when parts of the window sticker remain stuck to the backing paper. Take your time, most mistakes occur here!

Use your supplied free squeegee to card over your window sticker. Start in the middle/centre of the window sticker and move horizontal with overlapping movements towards the edge of the window sticker. During which you hold the window sticker couple centimetres (2 inches) above the window/mirror/surface itself. After application, allow the adhesive enough time to stick to the window. So that removing the application tape does not lift the window sticker from the glass. Remove the application tape after a couple of hours, 6 to 12 hours should be enough.